js333 > 计算机互联网 > 操作系统,搭建高性能计算环境

原标题:操作系统,搭建高性能计算环境

浏览次数:178 时间:2019-10-11

# eeprom local-mac-address?

3、intelmpi

1)上传安装程序l_mpi_p_4.1.0.024.tgz和license,可使用ssh工具传输。

2)解压缩安装程序并进入程序目录

tar xvf l_mpi_p_4.1.0.024.tgz

cd l_mpi_金沙js333娱乐场,p_4.1.0.024

3)开始安装、欢迎界面

./install

Step no: 1 of 6 | Welcome


Welcome to the Intel(R) MPI Library for Linux* OS version 4.1.


You will complete the steps below during this installation:

Step 1 : Welcome

Step 2 : License

Step 3 : Activation

Step 4 : Options

Step 5 : Installation

Step 6 : Complete


Press "Enter" key to continue or "q" to quit:

4)接受license

5)使用license文件激活

Step no: 3 of 6 | Activation


If you have purchased this product and have the serial number and a connection

to the internet you can choose to activate the product at this time. Activation

is a secure and anonymous one-time process that verifies your software licensing

rights to use the product. Alternatively, you can choose to evaluate the

product or defer activation by choosing the evaluate option. Evaluation software

will time out in about one month. Also you can use license file, license

manager, or the system you are installing on does not have internet access

activation options.


  1. I want to activate my product using a serial number [default]

  2. I want to evaluate my product or activate later

  3. I want to activate either remotely, or by using a license file, or by using a license manager

h. Help

b. Back to the previous menu

q. Quit


Please type a selection or press "Enter" to accept default choice [1]:

6)指定激活文件

Step no: 3 of 6 | Activation > Advanced activation


You can use license file, license manager, or the system you are installing on

does not have internet access activation options.


  1. Use a different computer with internet access [default]

  2. Use a license file

  3. Use a license server

h. Help

b. Back to the previous menu

q. Quit


Please type a selection or press "Enter" to accept default choice [1]: 2

Note: Press "Enter" key to back to the previous menu.

Please type the full path to your license file(s): /root/l_mpi_p_4.1.0.024/intel_mpi.lic


Activation completed successfully.


Press "Enter" key to continue:

7)选择安装目录和安装的组件,此处默认安装

Step no: 4 of 6 | Options


You are now ready to begin installation. You can use all default installation

settings by simply choosing the "Start installation Now" option or you can

customize these settings by selecting any of the change options given below

first. You can view a summary of the settings by selecting

"Show pre-install summary".


  1. Start installation Now

  2. Change install directory [ /opt/intel/impi/4.1.0.024 ]

  3. Change advanced options [ Current node ]

  4. Show pre-install summary

h. Help

b. Back to the previous menu

q. Quit


Please type a selection or press "Enter" to accept default choice [1]:

Step no: 6 of 6 | Complete


Thank you for installing and for using the Intel(R) MPI Library for Linux* OS

version 4.1.

Support services start from the time you install or activate your product. If

you have not already done so, please create your support account now to take

full advantage of your product purchase.

Your support account gives you access to free product updates and upgrades as

well as interactive technical support at Intel(R) Premier Support.

To create your support account, please visit the Subscription Services web site

.


q. Quit [default]


Please type a selection or press "Enter" to accept default choice [q]: q

[[email protected] l_mpi_p_4.1.0.024]#

8)设置环境变量

在/etc/profile文件末尾加入如下行,重新登录后生效。

source /opt/intel/impi/4.1.0/bin64/mpivars.sh

9)确认安装成功

      [[email protected] ~]# which mpiicc
      /opt/intel/impi/4.1.0.024/intel64/bin/mpiicc
      [[email protected] ~]# mpiicc -v
      mpiicc for the Intel(R) MPI Library 4.1 for Linux*
      Copyright(C) 2003-2012, Intel Corporation.  All rights reserved.
      icc version 13.1.0 (gcc version 4.4.6 compatibility)

 

一般我们配置自己熟悉的mpi为默认设置,所以可以再/etc/profile中注释掉不常用的mpi,打开常用的mpi,如有需要可以临时添加或者修改/etc/profile文件后重新登录,使用#注释,如下:

      #setting for intel compiler and mpi
      source /opt/intel/bin/compilervars.sh intel64
      source /opt/intel/impi/4.1.0/bin64/mpivars.sh

      #setting for openmpi
      #export MPI_HOME=/opt/openmpi-165
      #export PATH=$MPI_HOME/bin:$PATH
      #export LD_LIBRARY_PATH=$MPI_HOME/lib:$LD_LIBRARY_PATH

很多计算软件都是要从源代码编译的,并且运行也需要mpi的支持,本节我们来安...

-- binutils version not supported or not detectable

  1. Skip missing optional pre-requisites [default]
  2. Show the detailed info about issue(s)
  3. Re-check the pre-requisites

h. Help
b. Back to the previous menu

  1. Boot from the CD or DVD. At the boot screen, press the "Enter" key.

    金沙js333娱乐场 1

  2. Press the "tab" key to move focus to the "Skip" key, then press the "Enter" key to continue.

    金沙js333娱乐场 2

  3. On the "Welcome" screen, click the "Next" button.

    金沙js333娱乐场 3

  4. Select the appropriate language, then click the "Next" button.

    金沙js333娱乐场 4

  5. Select the relevant keyboard setting, then click the "Next" button.

    金沙js333娱乐场 5

  6. Click the "Yes" button on the disk partitioning warning dialog.

    金沙js333娱乐场 6

  7. Check the "Review and modify partitioning layout" option, then allow the installer to automatically partition the disk by clicking on the "Next" button.

    金沙js333娱乐场 7

  8. Click the "Yes" button on the subsequent warning dialog.

    金沙js333娱乐场 8

  9. The installer will list the default partitioning scheme for your size disk.

    金沙js333娱乐场 9

    The following screen shots show the actions I take for small test installations

  10. Edit the "/boot" partition, setting it to "150M" and "Fixed size", then click the "OK" button.

    金沙js333娱乐场 10

  11. The "/root" and "/swap" partitions are part of a volume group.

    金沙js333娱乐场 11

  12. Edit the "/root" partition, setting it to "8000 MB", then click the "OK" button.

    金沙js333娱乐场 12

  13. Edit the "swap" partition, setting it to "2048M", then click the "OK" button.

    金沙js333娱乐场 13

    If you need additional swap space, simply make this partition bigger.

  14. The partitions screen should now looks something like the following picture, then click the "Next" button.

    金沙js333娱乐场 14

  15. Accept the boot loader settings by clicking the "Next" button.

    金沙js333娱乐场 15

  16. Configure the network interface with the apropriate settings. This can be done automatically using DHCP, or manually.

    金沙js333娱乐场 16

  17. If you are not using DHCP, enter the appropriate IP addess and subnet mask, then click the "OK" button.

    金沙js333娱乐场 17

  18. If you are not using DHCP, enter the host name, gateway and DNS information, then click the "Next" button.

    金沙js333娱乐场 18

  19. Select the relevant region by clicking on the map.

    金沙js333娱乐场 19

  20. Select the relevant city by clicking on the map. Click on the "Next" button to proceed.

    金沙js333娱乐场 20

  21. Enter a root password for the server, then click the "Next" button to proceed.

    金沙js333娱乐场 21

  22. Select the "Customize now" option and the appropriate installation type and click the "Next" button.

    金沙js333娱乐场 22

  23. The "Package Group Selection" screen allows you to select the required package groups, and individual packages within the details section. When you've made your selection, click the "Next" button.

    金沙js333娱乐场 23

  24. On the "About to Install" screen, click the "Next" button.

    金沙js333娱乐场 24

  25. Click the "Continue" button on the "Required Install Media" screen.

    金沙js333娱乐场 25

  26. During the installation phase, enter the appropriate CDs as requested.

    金沙js333娱乐场 26

  27. Click the "Reboot" button to complete the installation.

    金沙js333娱乐场 27

  28. On the "Welcome" screen, click the "Forward" button.

    金沙js333娱乐场 28

  29. Accept the license agreement and click the "Forward" button.

    金沙js333娱乐场 29

  30. On the Firewall screen, choose the "Disabled" option and click the "Forward" button.

    金沙js333娱乐场 30

  31. Click the "Yes" button on the subsequent warning screen.

    金沙js333娱乐场 31

  32. On the SELinux screen, choose the "Disabled" option and click the "Forward" button.

    金沙js333娱乐场 32

  33. Click the "Yes" button on the subsequent warning screen.

    金沙js333娱乐场 33

  34. Accept the default setting on the Kdump screen by clicking the "Forward" button.

    金沙js333娱乐场 34

  35. Adjust the Date and Time settings if necessary, and click the "Forward" Button.

    金沙js333娱乐场 35

  36. If you have an Unbreakable Linux Support account, you can enter it here and register your system. Alternatively, you can pick the "No, I prefer to register at a later time" option and click the "Forward" button to avoid this step.

    金沙js333娱乐场 36

  37. Create an additional system user if required, and click the "Next" button.

    金沙js333娱乐场 37

  38. If you chose not to define an additional system user, click the "Continue" button on the resulting warning dialog.

    金沙js333娱乐场 38

  39. On the sound card screen, click the "Forward" button.

    金沙js333娱乐场 39

  40. On the "Additional CDs" screen, click the "Finish" button.

    金沙js333娱乐场 40

  41. Click the "OK" button on the reboot request dialog.

    金沙js333娱乐场 41

  42. Once the system has rebooted, you are presented with the login screen.

    金沙js333娱乐场 42

  43. Once logged in, you are ready to use the desktop.

    金沙js333娱乐场 43

local-mac-address?=true

2、安装openmpi

1)上传安装文件openmpi-1.6.5.tar.bz2,解压缩并进入安装目录

tar xvf openmpi-1.6.5.tar.bz2

cd openmpi-1.6.5

2)使用configure配置,prefix指定安装目录,后面的CC、CXX、FC、F77指定使用intel编译器作为接口

./configure --prefix=/opt/openmpi-165 CC=icc CXX=icpc FC=ifort F77=ifort

3)开始编译,可以使用-j后面跟数字进行多核编译,能减少编译时间。

make –j4

4)编译完成后,使用make install安装到指定的目录

make install

5)设置环境变量

      在/etc/profile文件末尾加入如下行,重新登录后生效。

      export MPI_HOME=/opt/openmpi-165
      export PATH=$MPI_HOME/bin:$PATH
      export LD_LIBRARY_PATH=$MPI_HOME/lib:$LD_LIBRARY_PATH

6)确认安装成功

      [[email protected] ~]# which mpicc
      /opt/openmpi-165/bin/mpicc
      [[email protected] ~]# mpicc -v
      icc version 13.1.0 (gcc version 4.4.6 compatibility)

# tar xvf l_cprof_p_11.0.084.tgz
# ./install.sh

This article provides a pictorial guide for performing a default installation of Oracle Linux 5.

3)    添加MAC地址

搭建高性能计算环境(三)、安装intel编译器和mpi,intelmpi

很多计算软件都是要从源代码编译的,并且运行也需要mpi的支持,本节我们来安装intel编译器和openmpi。

(以下仅记录关键步骤...)

For more information see:

e1000g1 ip:192.168.9.10

1、 Intel编译器的安装

需要的软件包:parallel_studio_xe_2013_update2_intel64.tgz、License文件

1)首先将软件包上传的Linux系统,可以使用上节介绍的ssh工具。

2)进入上传的目录,解压缩

tar xvf parallel_studio_xe_2013_update2_intel64.tgz

3)进去解压出来的目录

cd parallel_studio_xe_2013_update2_intel64

4)开始安装

./install

5)欢迎界面

Step no: 1 of 7 | Welcome


Welcome to the Intel(R) Parallel Studio XE 2013 Update 2 for Linux* installation

program.


You will complete the steps below during this installation:

Step 1 : Welcome

Step 2 : License

Step 3 : Activation

Step 4 : Intel(R) Software Improvement Program

Step 5 : Options

Step 6 : Installation

Step 7 : Complete


Press "Enter" key to continue or "q" to quit:

6)CentOS操作系统会提示不支持,跳过。

Step no: 1 of 7 | Options > Missing Optional Pre-requisite(s)


There are one or more optional unresolved issues. It is highly recommended to

resolve them all before you continue the installation. You can fix them without

exiting from the installation and re-check. Or you can quit from the

installation, fix them and run the installation again.


Missing optional pre-requisites

-- Intel(R) Composer XE 2013 Update 2 for Linux*: unsupported OS


  1. Skip missing optional pre-requisites [default]

  2. Show the detailed info about issue(s)

  3. Re-check the pre-requisites

h. Help

b. Back to the previous menu

q. Quit


Please type a selection or press "Enter" to accept default choice [1]:

7)接受license,输入accept

8)选择激活方式,此处使用文件激活,选择3

Step no: 3 of 7 | Activation


If you have purchased this product and have the serial number and a connection

to the internet you can choose to activate the product at this time. Activation

is a secure and anonymous one-time process that verifies your software licensing

rights to use the product. Alternatively, you can choose to evaluate the

product or defer activation by choosing the evaluate option. Evaluation software

will time out in about one month. Also you can use license file, license

manager, or remote activation if the system you are installing on does not

have internet access activation options.


  1. I want to activate my product using a serial number [default]

  2. I want to evaluate my product or activate later

  3. I want to activate either remotely, or by using a license file, or by using a

license manager

h. Help

b. Back to the previous menu

q. Quit


Please type a selection or press "Enter" to accept default choice [1]:

9)指定license文件

Step no: 3 of 7 | Activation > Advanced activation


You can use license file, license manager, or the system you are installing on

does not have internet access activation options.


  1. Use a different computer with internet access [default]

  2. Use a license file

  3. Use a license server

h. Help

b. Back to the previous menu

q. Quit


Please type a selection or press "Enter" to accept default choice [1]: 2

Note: Press "Enter" key to back to the previous menu.

Please type the full path to your license file(s): /root/NCOM_L___NT4V-6MS554NC.lic


Activation completed successfully.


Press "Enter" key to continue:

10)是否加入改进,选2就行了。

Step no: 4 of 7 | Intel(R) Software Improvement Program


Help improve your experience with Intel(R) software

Participate in the design of future Intel software. Select 'Yes' to give us

permission to learn about how you use your Intel software and we will do the rest.

- No Personal contact information is collected

- There are no surveys or additional follow-up emails by opting in

- You can stop participating at any time

Learn more about Intel(R) Software Improvement Program

With your permission, Intel may automatically receive anonymous information

about how you use your current and future Intel software.


  1. Yes, I am willing to participate and improve Intel software. (Recommended)

  2. No, I don't want to participate in the Intel(R) Software Improvement Program at this time.

b. Back to the previous menu

q. Quit


Please type a selection:

11)此处可以修改安装目录和要安装的组件,默认安装到/opt/intel目录下

Step no: 5 of 7 | Options


You are now ready to begin installation. You can use all default installation

settings by simply choosing the "Start installation Now" option or you can

customize these settings by selecting any of the change options given below

first. You can view a summary of the settings by selecting

"Show pre-install summary".


  1. Start installation Now

  2. Change install directory [ /opt/intel ]

  3. Change components to install [ All ]

  4. Change advanced options

  5. Show pre-install summary

h. Help

b. Back to the previous menu

q. Quit


Please type a selection or press "Enter" to accept default choice [1]:

WARNING: Destination directory already exists.

Would you like to overwrite this directory? ( Yes/No ) [ Yes ] :

12)提示我的虚拟机不支持此功能,跳过即可。

Step no: 5 of 7 | Options > Missing Optional Pre-requisite(s)


There are one or more optional unresolved issues. It is highly recommended to

resolve them all before you continue the installation. You can fix them without

exiting from the installation and re-check. Or you can quit from the

installation, fix them and run the installation again.


Missing optional pre-requisites

-- Intel(R) VTune(TM) Amplifier XE 2013 Update 4: Power analysis is not enabled


  1. Skip missing optional pre-requisites [default]

  2. Show the detailed info about issue(s)

  3. Re-check the pre-requisites

h. Help

b. Back to the previous menu

q. Quit


Please type a selection or press "Enter" to accept default choice [1]:

12)开始安装

Step no: 6 of 7 | Installation


Each component will be installed individually. If you cancel the installation,

components that have been completely installed will remain on your system. This

installation may take several minutes, depending on your system and the options

you selected.


Installing Amplifier XE Command line interface component... done


Installing Amplifier XE Sampling driver kit component...

WARNING: NMI watchdog timer is enabled.

Suggestion: turn off the nmi_watchdog timer before running sampling.


Installing Amplifier XE Power driver kit component... done


Installing Amplifier XE Graphical user interface component... done


Installing Inspector XE Command line interface component... done


Installing Inspector XE Graphical user interface component... done


Installing Advisor XE Command line interface component... done


Installing Advisor XE Graphical user interface component... done


Installing Intel Fortran Compiler XE 13.1 on Intel(R) 64 component... done


Installing Intel C++ Compiler XE 13.1 on Intel(R) 64 component... done


Installing Intel Debugger 13.0 on Intel(R) 64 component... done


Installing Intel Math Kernel Library 11.0 Update 2 on Intel(R) 64 component... done


Installing Intel Integrated Performance Primitives 7.1 Update 1 on Intel(R) 64 component... done


Installing Intel Threading Building Blocks 4.1 Update 2 core files and examples component... done


Finalizing installation... done

Step no: 7 of 7 | Complete


Thank you for installing and using the

Intel(R) Parallel Studio XE 2013 Update 2 for Linux*

Reminder: Intel(R) VTune(TM) Amplifier XE users must be members of the "vtune"

permissions group in order to use Event-based Sampling.

To register your product purchase, visit

To get started using Intel(R) VTune(TM) Amplifier XE 2013 Update 4:

- To set your environment variables: source

/opt/intel/vtune_amplifier_xe_2013/amplxe-vars.sh

- To start the graphical user interface: amplxe-gui

- To use the command-line interface: amplxe-cl

- For more getting started resources: /opt/intel/vtune_amplifier_xe_2013/

documentation/en/welcomepage/get_started.html.

To get started using Intel(R) Inspector XE 2013 Update 4:

- To set your environment variables: source

/opt/intel/inspector_xe_2013/inspxe-vars.sh

- To start the graphical user interface: inspxe-gui

- To use the command-line interface: inspxe-cl

- For more getting started resources: /opt/intel/inspector_xe_2013/

documentation/en/welcomepage/get_started.html.

To get started using Intel(R) Advisor XE 2013 Update 2:

- To set your environment variables: source

/opt/intel/advisor_xe_2013/advixe-vars.sh

- To start the graphical user interface: advixe-gui

- To use the command-line interface: advixe-cl

- For more getting started resources: /opt/intel/advisor_xe_2013/

documentation/en/welcomepage/get_started.html.

To get started using Intel(R) Composer XE 2013 Update 2 for Linux*:

- Set the environment variables for a terminal window using one of the

following (replace "intel64" with "ia32" if you are using a 32-bit

platform).

For csh/tcsh:

$ source /opt/intel/bin/compilervars.csh intel64

For bash:

$ source /opt/intel/bin/compilervars.sh intel64

To invoke the installed compilers:

For C++: icpc

For C: icc

For Fortran: ifort

To get help, append the -help option or precede with the man command.

- For more getting started resources:

/opt/intel/composer_xe_2013/Documentation/en_US/get_started_lc.htm.

/opt/intel/composer_xe_2013/Documentation/en_US/get_started_lf.htm.

To view movies and additional training, visit

.


q. Quit [default]


Please type a selection or press "Enter" to accept default choice [q]: q

[[email protected] parallel_studio_xe_2013_update2_intel64]#

13)安装完成后设置环境变量

在/etc/profile文件的末尾加入如下命令,重新登录后生效。

source /opt/intel/bin/compilervars.sh intel64

14)确认安装成功

[[email protected] ~]# icc -v

icc version 13.1.0 (gcc version 4.4.6 compatibility)

在intel官方网站上下载FORTRAN编译器的免费版本(Non-Commercial Software Download)。
通过注册获得序列号(serial number)及license文件(NCOM_L_CMP_FOR_***.lic)

Hope this helps. Regards Tim...

Selecta Language      #选择语言


  • Oracle Linux

此步骤不是必须做的,进入客户端系统,查看网卡的MAC地址,再次核对:

h. Help
b. Back to the previous menu

As you would expect, the installation is almost entirely the same as the Red Hat Enterprise Linux 5 installation.

在服务器端配置客户端的主机名与IP地址:

run the installation again.

Missing optional pre-requisite
-- cannot determine operating system type
-- system glibc or kernel version not supported or not detectable

Back to the Top.

d) /pci@0,600000/pci@0,1/network@1

q. Quit

Please type a selection or press "Enter" to accept default choice [1]: 1

Please type your serial number (the format is XXXX-XXXXXXXX): N**M-V******N

 

Step no: 4 of 7 | Installation configuration - Missing Optional

此过程时间会较长,命令执行完成后,/export/home/dvdsparc目录会生成Solaris光盘中的所有数据

q. Quit

Please type a selection or press "Enter" to accept default choice [1]: 1

安装中途会遇到找不到共享库libstdc++.so.5的问题,需要安装该库即可。

The following required for installation commands are missing:
libstdc++.so.5 (library)

# zypper install libstdc++.so.5

... error while loading shared libraries: libstdc++.so.5

# rpm -ivhU libstdc++33-3.3.3-27.4.x86_64.rpm 

6、退出root用户的登陆,然后以一个个人用户登陆,
   登陆以后修改用户根目录下的.profile文件,在最后一行加入这么一行:

. /opt/intel/Compiler/11.0/084/bin/ifortvars.sh intel64
注:其中点号.之后有空格。

#vim .profile
#source .profile

金沙js333娱乐场 44

 6) PC Console

  1. I want to activate and install my product [default]
  2. I want to evaluate my product or activate later
  3. Alternative activation - necessary if you plan to activate remotely ( because
       this system may not be set for successful Internet connection), or use a
       license file, or use a license server
  4. View additional information about software activation

 

You can also choose to install the software for evaluation purposes or activate
at a later time. The software will time out in 30 days.

SunFire Vxx0, Keyboard present
Copyright 2006 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.1x.xx, 1024 MB memory installed, Serial #85583740.
Ethernet address 8:0:20:ab:cd:ef, Host ID: 80abcdef.

Pre-requisite

There is one or more optional unresolved issues. It is highly recommended to fix
it all before you continue the installation. You can fix it without exiting from
the installation and re-check. Or you can quit from the installation, fix it and

2)    Solaris界面

 

a.c)检查网卡状态

{20} ok show-nets

4)设置名称识别

/pci@1,700000/network@0

e1000g1 ip:192.168.9.11

安装服务器:SUN M8000, 已安装Oracle Solaris 10 1/13,

{20} ok devalias net

1000 Mbps full duplex  Link up  (此网口状态为link up)
Looking for Ethernet Packets.
'.' is a Good Packet.  'X' is a Bad Packet.
Type any key to stop.

 10) Televideo 925

  4. Italian

通过此命令可得知共识别出了4块网卡(全是电口,光口网卡无法识别)

网络安装必须要通过网卡引导,所以首先要确定主机的多个网卡中,那个网卡承担了此引导工作,并且状态是否开启:

net                    /pci@0,600000/pci@0,1/network@

a.d)设置引导网卡

# more /etc/hosts

Whattype of terminal are you using?              #选择终端

local-mac-address?=flase

q) NO SELECTION

联网方式:两台主机的千兆口直连,万兆口通过交换机连接(同一网段)

online        11:43:55svc:/network/nfs/mapid:default

  9. Swedish

二、 实验步骤

千兆口:e1000g0与e1000g1

# eeprom local-mac-address?

 将此地址记录

Timed out waiting for Autonegotation to complete

192.168.9.10  server.e1000g1 

copying boot file to/tftpboot/inetboot.SUN4U.Solaris_10-1

"/pci@1,700000/network@0,1"1 "e1000g"

- TheOracle Solaris Installation Program

 

  The Solaris installation program is dividedinto a series of short sections

  where you'll be prompted to provideinformation for the installation. At

  the end of each section, you'll be able tochange the selections you've

  made before continuing.

  About navigation...

        - The mouse cannot be used

        - If your keyboard does not havefunction keys, or they do not

          respond, press ESC; the legend at thebottom of the screen

          will change to show the ESC keys touse for navigation.


F2_Continue    F6_Help              #一些信息提示,选择F2

enabling network/tftp/udp6 service

{20} ok watch-net-all

local-mac-address      00 15 17 f7 22 3d

2)开始安装系统

1.  目的

 将安装目录通过nfs注册共享,需要在/etc/dfs/dfstab中添加一行

/pci@0,600000/pci@0,1/network@1

{20} ok devalias net

a.a)检查可识别的网卡

2.  基础环境

Pleasemake a choice (0 - 10), or press h or ? for help: 0  #选择0

bash-3.2#cd /export/home/dvdsparc/Solaris_10/Tools/

updating /etc/bootparams

 2) DEC VT52

# ifconfig –a  (客户端)

 8) Sun Workstation

或者通过“ more /etc/path_to_inst |grep net”命令查看路径名来确定网卡。

客户端e1000g1与安装服务器端的e1000g1同属一个网段

Check cable and try again

0:15:17:f7:22:3d  client.e1000g1  #添加客户端网卡的mac地址与主机名称

  1. Brazilian Portuguese

# svcadmenable svc:/network/nfs/server  #开启nfs服务

a.b)检查设定的net别名

online        11:43:55svc:/network/nfs/mapid:default

Share –F nfs -o ro,anon=0 -d"install server directory" /export/home/dvdsparc

万兆口:ixgbe0与ixgbe1

Rebooting with command: bootnet
Boot device: /pci@1,700000/network@0,1 File and args:
2aa00
Use is subject to license terms.
whoami: no domain name
Configuring /dev and /devices
Using RPC Bootparams for network configuration information.
Configured interface ce0
Searching for configuration file(s)...
Search complete.

 7) Sun Command Tool

{20} ok .properties

安装介质:一张Solaris 10 DVD安装光盘

4.  客户端安装系统

/pci@0,600000/pci@0,1/network@1,1

  客户端开启e1000g1(/pci@1,700000/network@0,1)网卡为可进行引导的网卡,故需确保此客户端网卡与安装服务器端的网卡在同一子网内(如果不在同一子网,则需增加引导服务器)

# vi /etc/ethers

  3. German

a) /pci@1,700000/network@0,1

 9) Televideo 910

通过此命令可得知“pci@0,600000/pci@0,1/network@”为可进行网络引导的网卡

a.e)查看MAC地址

        ether 0:15:17:f7:22:3d

  8. Spanish

enabling network/rarp service

Converting /etc/inetd.conf

客户端进入ok状态

# Internet host table

online        11:43:55 svc:/network/nfs/cbd:default

e1000g1:flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2

Check cable and try again

1)检查网卡MAC地址

  0. English

e1000g1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu1500 index 2

bash-3.2#svcs -a | grep nfs

#./setup_install_server/export/home/dvdsparc #将光盘数据拷贝到dvdsparc目录中

"/pci@0,600000/pci@0,1/network@1,1"1 "bge"

  6. Korean

Completingsystem identification...

"/pci@0,600000/pci@0,1/network@1"0 "bge"

#mkdir -p/export/home/dvdsparc  #创建安装目录

bash-3.2#./add_install_client clinet-e1000g1 sun4u

127.0.0.1 localhost loghostwangbobo

{20} ok cd /pci@1,700000/network@0,1

Timed out waiting for Autonegotation to complete

share -Fnfs -o ro,anon=0 -d "install server directory" /export/home/dvdsparc

net                      /pci@1,700000/network@0,1

c) /pci@0,600000/pci@0,1/network@1,1

Typethe number of your choice and press Return: 3

-/export/home/solaris10 ro,anon=0 "install server directory"

enabling network/rpc/bootparams service

客户端:SUN M8000,无光驱,

online        11:43:55svc:/network/nfs/status:default

online        15:32:22svc:/network/nfs/server:default

 12) X Terminal Emulator (xterms)

 13) CDE Terminal Emulator (dtterm)

1)    拷贝solaris光盘

online        11:43:55svc:/network/nfs/cbd:default

1.  确定网卡是否启用自身的MAC地址

online        11:43:55svc:/network/nfs/nlockmgr:default

5)设置NFS共享

online        11:43:58 svc:/network/nfs/rquota:default

#

#cd /cdrom/sol_10_1106_sparc/Solaris_10/Tools#进入光盘路径

 14) Other

1)    xscf界面

……………………

making /tftpboot

  2. French

-Identify This System

On thenext screens, you must identify this system as networked or

non-networked,and set the default time zone and date/time.

 If this system is networked, the software willtry to find the information

  it needs to identify yoursystem; you will be prompted to supply any

  information it cannot find.

  > To begin identifyingthis system, press F2.


    F2_Continue    F6_Help    #开始配置系统信息,选择F2

 

- Configure Multiple Network Interfaces ------------#选择要配置的网络接口

  Multiple network interfaceshave been detected on this system. Specify all

  of the network interfacesyou want to configure.

  Note: You must choose atleast one interface to configure.

      Network interfaces

      ------------------

      [ ] e1000g0

      [ ] e1000g1

      [ ] bge0

      [ ] bge1

      [X] ixgbe0                            #选择两块网卡启用

      [X] ixgbe1


    F2_Continue    F6_Help

- Primary Network Interface ---------------------- #设置主网络接口

  On this screen you mustspecify which of the following network adapters is

  the system's primary networkinterface.  Usually the correct choice isthe

  lowest number.  However, do not guess; ask your systemadministrator if

  you're not sure.

  > To make a selection,use the arrow keys to highlight the option and

    press Return to mark it[X].

      Primary networkinterface

    -------------------------

      [X] ixgbe0                #选择ixgbe0为主网络接口

      [ ] ixgbe1

    F2_Continue    F6_Help

- DHCP for ixgbe0 ----------      #是否为ixgbe0启用dhcp

  Specify whether or not thisnetwork interface should use DHCP to configure

  itself.  Choose Yes if DHCP is to be used, or No ifthe network interface is

  to be configured manually.

  NOTE: DHCP support will notbe enabled, if selected, until after the system

  reboots.

      Use DHCP for ixgbe0

      -------------------

      [ ] Yes

      [X] No                  #本环境下选择不启用DHCP


    F2_Continue    F6_Help

- Host Name for ixgbe0 -----------------#hostname的名称设置,一个网卡一个名称

  Enter the host name whichidentifies this system on the network. The name

  must be unique within yourdomain; creating a duplicate host name will cause

  problems on the networkafter you install Solaris.

 

  A host name must have atleast one character; it can contain letters,

  digits, and minus signs (-).

 

                Host name forixgbe0  clinet-ixgbe0


    F2_Continue    F6_Help

 

- IP Address for ixgbe0            #为ixgbe0网卡设置IP地址

  Enter the Internet Protocol(IP) address for this network interface. It

  must be unique and followyour site's address conventions, or a

  system/network failure couldresult.

  IP addresses contain foursets of numbers separated by periods (for example

  129.200.9.1).

              IP address for ixgbe0 192.168.0.100 


    F2_Continue    F6_Help

- Subnet for ixgbe0 ----------------------------#选择子网系统

  On this screen you mustspecify whether this system is part of a subnet.  If

  you specify incorrectly, thesystem will have problems communicating on the

  network after you reboot.

  > To make a selection,use the arrow keys to highlight the option and

    press Return to mark it [X].

      System part of a subnet

      -----------------------

      [X] Yes

      [ ] No

 


    F2_Continue    F6_Help

- Netmask for ixgbe0 -------------------------#为ixgbe0设置子网掩码

  On this screen you mustspecify the netmask of your subnet.  Adefault

  netmask is shown; do notaccept the default unless you are sure it is

  correct for yoursubnet.  A netmask must contain four setsof numbers

  separated by periods (forexample 255.255.255.0).

 

                  Netmask for ixgbe0 255.255.255.0


    F2_Continue    F6_Help

 

- IPv6 for ixgbe0 ---------------------------#设置IPV6

 

  Specify whether or not youwant to enable IPv6, the next generation Internet

  Protocol, on this networkinterface.  Enabling IPv6 will have noeffect if

  this machine is not on anetwork that provides IPv6 service.  IPv4service

  will not be affected if IPv6is enabled.

  > To make a selection,use the arrow keys to highlight the option and

    press Return to mark it [X].

      Enable IPv6 for ixgbe0

      ----------------------

      [ ] Yes

      [X] No


    F2_Continue    F6_Help

- Set the Default Route for ixgbe0 ----------------------#配置路由信息

  To specify the defaultroute, you can let the software try to detect one

  upon reboot, you can specifythe IP address of the router, or you can choose

  None.  Choose None if you do not have a router onyour subnet.

  > To make a selection,use the arrow keys to select your choice and press

  Return to mark it [X].

      Default Route for ixgbe0

    --------------------------

      [] Detect one uponreboot

      [ X] Specify one    #本实验环境选择自己指定路由

      [ ] None


    F2_Continue    F6_Help

- Default Route IP Address for ixgbe0 --------------------#设置路由的地址

  Enter the IP address of thedefault route. This entry will be placed in the

  /etc/defaultrouter file andwill be the default route after you reboot

  (example 129.146.89.225).

 

        Router IP Address for ixgbe0 192.168.0.1    #网卡地址


    F2_Continue    F6_Help

- Confirm Information for ixgbe0 ----------#选择主网卡的配置信息

  > Confirm the followinginformation.  If it is correct, press F2;

    to change any information,press F4.

          Primary networkinterface: ixgbe0

      Secondary networkinterfaces: ixgbe1

                          UseDHCP: No

                          Hostname: rdmsdb02a-ixgbe0

                        IPaddress: 10.78.56.24

            System part of asubnet: Yes

                          Netmask: 255.255.255.128

                        EnableIPv6: No

                      DefaultRoute: Specify one

                  Router IPAddress: 10.78.56.1


    F2_Continue    F4_Change  F6_Help  #可选择F4进行变更,否则F2继续

(如果有第二块网卡,接下来要进行第二块网卡的配置,过程与第一块相同)

- Configure Security Policy: -------------------------  #选择安全机制

  Specify Yes if the systemwill use the Kerberos security mechanism.

  Specify No if this system willuse standard UNIX security.

      Configure KerberosSecurity

    ---------------------------

      [ ] Yes

      [X] No


    F2_Continue    F6_Help

- Confirm Information ----------------------------------------#信息的确认

  > Confirm the followinginformation.  If it is correct, press F2;

    to change any information,press F4.

        Configure KerberosSecurity: No


    F2_Continue    F4_Change  F6_Help

Starting remote procedure call (RPC) services:

 

- Name Service ----------------------------#名称服务的安装

  On this screen you mustprovide name service information.  Selectthe name

  service that will be used bythis system, or None if your system will either

  not use a name service atall, or if it will use a name service not listed

  here.

  > To make a selection,use the arrow keys to highlight the option

    and press Return to markit [X].

      Name service

      ------------

      [] NIS+

      [ ] NIS

      [ ] DNS

      [ ] LDAP

      [X] None                          #选择不安装


    F2_Continue    F6_Help

 

- Confirm Information ------------------------------- #信息确认

  > Confirm the followinginformation.  If it is correct, press F2;

    to change any information,press F4.

 

                      Name service: None


    F2_Continue    F4_Change  F6_Help

 

- NFSv4 Domain Name -----------------------------#NFSv4的名称(使用系统的域名服务器)

  NFS version 4 uses a domainname that is automatically derived from the

  system's naming services.The derived domain name is sufficient for most

  configurations. In a fewcases, mounts that cross domain boundaries might

  cause files to appear to beowned by "nobody" due to the lack of a common

  domain name.

  The current NFSv4 defaultdomain is: ""

 

      NFSv4 DomainConfiguration

    ----------------------------------------------

      [X] Use the NFSv4 domain derived by the system  #选择默认

      [ ] Specify a differentNFSv4 domain


    F2_Continue    F6_Help

 

- Confirm Information for NFSv4 Domain ---------------------#对NFSv4域名信息的确认

  > Confirm the followinginformation.  If it is correct, press F2;

    to change any information,press F4.

                NFSv4 DomainName:  << Value to be deriveddynamically >>

 


    F2_Continue    F4_Change  F6_Help

 

 

 

 

- Time Zone -------------------------------------#选择时区

  On this screen you mustspecify your default time zone.  You canspecify a

  time zone in threeways:  select one of the continents oroceans from the

  list, select other - offsetfrom GMT, or other - specify time zone file.

  > To make a selection,use the arrow keys to highlight the option and

    press Return to mark it[X].

 

      Continents and Oceans

    ----------------------------------

  -  [ ] Africa

  |  [ ] Americas

  |  [ ] Antarctica

  |  [ ] Arctic Ocean

  |  [X] Asia

  |  [ ] Atlantic Ocean

  |  [ ] Australia

  |  [ ] Europe

  v  [ ] Indian Ocean


    F2_Continue    F6_Help

 

 

2.  客户端检查网卡状态

192.168.9.11  clinet.e1000g1

"/pci@5,700000/ethernet@0"1 "ixgbe"

Timed out waiting forAutonegotation to complete
Check cable and try again
Link Down

/pci@1,700000/network@0,1

"/pci@3,700000/ethernet@0"0 "ixgbe"

通过此命令可知“pci@0,600000/pci@0,1/network@”状态都为link并down没有开启,无法接受和发送数据包,而“/pci@1,700000/network@0”和“/pci@1,700000/network@0,1”是Link up状态,可以收发数据包,故需将net的网卡设置为link up状态的网卡

        ether 0:15:17:f2:8c:7f

#share    #查看共享目录

  10. Traditional Chinese

...........................

# svcs -a |grep nfs  #检查NFS服务状态

ok boot net

ixgbe0 ip:192.168.0.101

ixgbe0 ip:192.168.0.100

        inet 192.168.9.10 netmask ffffff00 broadcast192.168.9.255

online        11:43:57svc:/network/nfs/client:default

 5) Lear Siegler ADM31

online        11:43:58svc:/network/nfs/rquota:default

online        11:43:55svc:/network/nfs/status:default

 11) Wyse Model 50

        inet192.168.9.11 netmask ffffff00 broadcast 192.168.9.255

online        11:43:57svc:/network/nfs/client:default

2)    确定网络状态

  7. Simplified Chinese

3.  安装服务器配置

# more  /etc/path_to_inst |grep net

# ifconfig –a  (服务器端)

online        11:43:55 svc:/network/nfs/nlockmgr:default

"/pci@1,700000/network@0"0 "e1000g"

如果ethers文件不存在,则可自己建立

b) /pci@1,700000/network@0

在SPARC平台上,每个基于SPARC的系统都具有系统范围的MAC的地址,默认情况下所有的接口都使用该地址,故默认情况下,每个接口的MAC地址是相同的,但要使用IPMP,则组中的每个接口必须具有唯一的MAC地址,这些地址必须使用出厂安装的MAC地址。可以使用“eeprom local-mac-address?”命令来检测当前系统的所有接口是否使用了系统范围的MAC地址:

 4) Heathkit 19

# cat/etc/dfs/dfstab

#shareall  #共享安装目录

1000 Mbps full duplex  Link up  (此网口状态为link up)
Looking for Ethernet Packets.
'.' is a Good Packet.  'X' is a Bad Packet.
Type any key to stop.
...........................

在没有光驱的情况下客户端服务器进行solaris10 1/13系统重装

6)添加网络安装客户端启动镜像

 1) ANSI Standard CRT

通过前期提及的“.properties”命令来核对客户端网卡的MAC地址与服务器端的配置是否相符。

在关机状态下,客户端与服务器端要实现数据的通信,除了网络是互通的外,还需要彼此识别,这里的识别就必须要通过唯一的MAC地址来进行识别,故需将客户端的MAC地址添加到安装服务器中的配置文件内

若对eeprpm命令相应的值为false,则表示所有的接口使用的是系统范围的MAC地址,需将值改为true(服务器端与客户端均如此)

 

Timed out waiting forAutonegotation to complete
Check cable and try again
Link Down

一、环境介绍

#

- Country or Region

  > To make a selection,use the arrow keys to highlight the option and

    press Return to mark it [X].

      Countries and Regions

      ------------------------

  -  [ ] Afghanistan

  |  [ ] Armenia

  |  [ ] Azerbaijan

  |  [ ] Bahrain

  |  [ ] Bangladesh

  |  [ ] Bhutan

  |  [ ] Brunei

  |  [ ] Cambodia

  |  [X] China

  |  [ ] Cyprus

  |  [ ] East Timor

  |  [ ] Georgia

  v  [ ] Hong Kong

 


    F2_Continue    F6_Help

 

 

- Date and Time -----------------------------  #当前的日期与时间

  > Accept the default dateand time or enter

    new values.

  Date and time: 2014-12-1815:34

 

                Year  (4 digits) : 2014

                Month  (1-12)    : 12

                Day    (1-31)    : 18

                Hour  (0-23)    : 15

                Minute(0-59)    : 34

 


    F2_Continue    F6_Help

- Confirm Information --------------------------#信息确认

  > Confirm the followinginformation.  If it is correct, press F2;

    to change any information,press F4.

 

                          Timezone: PRC

                      Date andtime: 2014-12-18 15:34:00

 


    F2_Continue    F4_Change  F6_Help

 

- Root Password --------------------------------------#设置密码

  Please enter the rootpassword for this system.

  The root password maycontain alphanumeric and special characters. For

  security, the password willnot be displayed on the screen as you type it.

 

  > If you do not want aroot password, leave both entries blank.

 

                    Rootpassword:               

                    Rootpassword:

 


    F2_Continue    F6_Help

 

- Enabling remote services --------------------------#设置是否远程

  Would you like to enablenetwork services for use by remote clients?

  Selecting "No"provides a more secure configuration in

  which Secure Shell is theonly network service provided to

  remote clients.  Selecting "Yes" enables a largerset of

  services as in previousSolaris releases. If in doubt, it is

  safe to select"No" as any services can be individually enabled

  after installation.

  Note: This choice onlyaffects initial installs. It doesn't affect upgrades.

 

      Remote services enabled

      -----------------------

      [X] Yes

      [ ] No


    F2_Continue    F6_Help

 

- Provide Oracle Configuration Manager Registration Information--------#注册一些信息,本处未进行选择

  To improve products andservices, Oracle Solaris communicates configuration

  data to Oracle afterrebooting.

  You can register yourversion of Oracle Solaris to capture this data for

  your use, or the data issent anonymously.

  For information about whatconfiguration data is communicated and how to

  control this facility, seethe Release Notes or

  www.oracle.com/goto/solarisautoreg

  > Use the arrow keys toselect the option and press Return to

    mark it [X].

    -----------------------------------------------------------------

      [ ] I would like toregister using My Oracle Support information.


    F2_Continue    F6_Help

 

- Provide Oracle Configuration Manager Registration Information---------#设置代理的相关信息

  To send the configurationdata anonymously, complete the following fields.

  If using a proxy server,provide the proxy settings.

 

  For information about whatconfiguration data is communicated and how to

  control this facility, seethe Release Notes or

  www.oracle.com/goto/solarisautoreg

            Proxy Server HostName:                                       

          Proxy Server PortNumber:

              HTTP Proxy UserName:

                HTTP Proxy Password:

 


    F2_Continue    F6_Help

 

- Solaris Interactive Installation ------------------------#选择安装的模式

  On the following screens,you can accept the defaults or you can customize

  how Solaris software will beinstalled by:

 

        - Selecting the typeof Solaris software to install

        - Selecting disks tohold software you've selected

        - Selecting unbundledproducts to be installed with Solaris

        - Specifying how filesystems are laid out on the disks

  After completing thesetasks, a summary of your selections (called a

  profile) will be displayed.

  There are two ways toinstall your Solaris software:

  - "Standard"installs your system from a standard Solaris Distribution.

      Selecting"Standard" allows you to choose between initial install

      and upgrade, if yoursystem is upgradable.

  - "Flash"installs your system from one or more Flash Archives.


    F2_Standard    F4_Flash  F5_Exit    F6_Help

 

- iSCSI Installation ----------------------------#iSCSI安装选择

  Do you want to installOracle Solaris 10 on an iSCSI target?

 

  NOTE: You must have createdthe iSCSI target before beginning the OS

  installation and the targetsystem should be running Oracle Solaris 11 or

  Solaris 10 U5 or greater.

 

  If you choose to install theOS on a non-iSCSI target, you will be taken

  directly to the Oracle Solaris10 installation screens.

            [X] Install on non-iSCSI target

            [ ] Install on iSCSI target


    F2_Continue    F3_Go Back    F5_Exit

 

- Eject a CD/DVD Automatically? ---------------#是否自动弹出CD/DVD

  During the installation ofSolaris software, you may be using one or more

  CDs/DVDs. You can choose tohave the system eject each CD/DVD automatically

  after it is installed or youcan choose to manually eject each CD/DVD.

 

 

            [X] Automatically eject CD/DVD

            [ ] Manually ejectCD/DVD

 


    F2_Continue    F3_GoBack    F5_Exit

 

- Reboot After Installation? -------------------------#安装完成后自动重新引导

  After Solaris software isinstalled, the system must be rebooted. You can

  choose to have the systemautomatically reboot, or you can choose to

  manually reboot the systemif you want to run scripts or do other

  customizations before thereboot.  You can manually reboot a systemby using

  the reboot(1M) command.

 

            [X] Auto Reboot

            [ ] Manual Reboot


    F2_Continue    F3_Go Back    F5_Exit

 

- Choose Media ---------------#选择安装的介质

  Please specify the mediafrom which you will install the Solaris Operating

  System.

  Media:

 

      [ ]  CD/DVD            #通过CD/DVD安装

      [X]  NetworkFile System  #通过网络方式安装

 


    F2_Continue    F3_Go Back    F5_Exit

- Specify Network File System Path -----------------------#选择网络安装的路径

  Please specify the path tothe network file system from which you will

  install the SolarisOperating System.  Example:

 

    NFS Location:server:/path_to_Solaris_image

=========================================================================

 

            NFS Location: 192.168.0.101:/export/home/dvd                 


    F2_Continue    F3_Go Back

 

- Solaris Interactive Installation ----------------#选择安装的方式

 

  This system is upgradable,so there are two ways to install the Solaris

  software.

 

  The Upgrade option updatesthe Solaris software to the new release, saving

  as many modifications to theprevious version of Solaris software as

  possible.  Back up the system before using the Upgradeoption.

 

  The Initial optionoverwrites the system disks with the new version of

  Solaris software.  This option allows you to preserve anyexisting file

  systems.  Back up any modifications made to theprevious version of Solaris

  software before starting theInitial option.

 

  After you select an optionand complete the tasks that follow, a summary of

  your actions will bedisplayed.

                                    #F2系统升级  F4 系统安装


    F2_Upgrade    F3_Go Back    F4_Initial    F5_Exit    F6_Help

 

- Initializing ---------------------------------------------------

  The system is beinginitialized.

  Loading install media,please wait...

 

- License -------------------------------------------------

        You acknowledge thatyour use of this Oracle Solaris software product

        is subject to (i) thelicense terms that you accepted when you obtained

        the right to use Oracle Solaris software;or (ii) the license terms

        that you agreed towhen you placed your Oracle Solaris software order

        with Oracle; or (iii)the Oracle Solaris software license terms

        included with thehardware that you acquired from Oracle; or, if (i),

        (ii) or (iii) are notapplicable, then, (iv) the OTN License Agreement

        for Oracle Solaris(which you acknowledge you have read and agree to)

        available at

             

                    solaris-cluster-express-license-167852.html

        Note: Softwaredownloaded for trial use or downloaded as replacement

        media may not be usedto update any unsupported software.

 


    F2_Accept License    F5_Exit

- Select Geographic Regions -----------------------#选择字符集,将所有中文的字符集都选择

 

  Select the geographicregions for which support should be installed.

 

    [ ]    Malay, Malaysia (UTF-8)

    [ ]    Marathi, India (UTF-8)

    [X]    Simplified Chinese EUC

    [X]    Simplified Chinese GB18030

    [X]    Simplified Chinese GBK 

    [X]    Simplified Chinese UTF-8

    [ ]    Tamil, India (UTF-8)   

    [ ]    Telugu, India (UTF-8)   

    [ ]    Thai TIS620

    [ ]    Thai UTF-8

    [X]    Traditional Chinese (Hong Kong) BIG5+HKSCS

    [X]    Traditional Chinese (Hong Kong) UTF-8   

    [X]    Traditional Chinese BIG5

    [X]    Traditional Chinese EUC

    [X]    Traditional Chinese UTF-8

  > [ ] Central Europe

  Locale is selected.  Press Return to deselect


    F2_Continue    F3_Go Back    F5_Exit  F6_Help

 

- Select System Locale -----------------------------#选择系统语言环境

 

  Select the initial locale tobe used after the system has been installed.

 

    [X]    POSIX C ( C )

        Asia

    [ ]    Chinese, Singapore (UTF-8) ( zh_SG.UTF-8 )

    [ ]    Simplified Chinese EUC ( zh )

    [ ]    Simplified Chinese GB18030 ( zh_CN.GB18030)

    [ ]    Simplified Chinese GBK ( zh.GBK )

    [ ]    Simplified Chinese UTF-8 ( zh.UTF-8 )

    [ ]    Traditional Chinese (Hong Kong) BIG5+HKSCS( zh_HK.BIG5HK )

    [ ]    Traditional Chinese (Hong Kong) UTF-8 (zh_HK.UTF-8 )

    [ ]    Traditional Chinese BIG5 ( zh_TW.BIG5 )

    [ ]    Traditional Chinese EUC ( zh_TW )

    [ ]    Traditional Chinese UTF-8 ( zh_TW.UTF-8 )


    F2_Continue    F3_Go Back    F5_Exit  F6_Help

 

- Additional Products --------------------------------#附加产品选择

  To scan for additionalproducts, select the location you wish to scan.

  Products found at theselected location that are in a Web Start Ready

  install form will be addedto the Products list.

  Web Start Ready product scanlocation:

      [X]  None

      [ ]  CD/DVD

      [ ]  Network File System

 


    F2_Continue    F3_Go Back    F5_Exit

 

- Choose Filesystem Type ------------------------ #选择文件系统

  Select the filesystem to usefor your Solaris installation

 

 

            [ ] UFS

            [X] ZFS  #在solaris10之后跟分区可以采用ZFS的文件系统,故这里我选择将根设置为ZFS的形式,方便扩展


    F2_Continue    F3_Go Back    F5_Exit  F6_Help

 

- Select Software -------------------------------------- #选择软件包

  Select the Solaris softwareto install on the system.

 

  NOTE: After selecting asoftware group, you can add or remove software by

  customizing it. However,this requires understanding of software

  dependencies and how Solarissoftware is packaged.

 

      [X]  EntireDistribution plus OEM support ....... 11151.00 MB #选择最大的包

      [ ]  Entire Distribution ........................11105.00 MB

      [ ]  Developer System Support ...................10875.00 MB

      [ ]  End User System Support ....................9806.00 MB

      [ ]  Core System Support ........................5300.00 MB

      [ ]  Reduced Networking Core System Support .....5245.00 MB

 


    F2_Continue    F3_Go Back    F4_Customize    F5_Exit  F6_Help

 

- Select Disks -------------------------------------------#选择磁盘,选择2个磁盘可互为镜像

  On this screen you mustselect the disks for installing Solaris software.

  Start by looking at theSuggested Minimum field; this value is the

  approximate space needed toinstall the software you've selected. For ZFS,

  multiple disks will beconfigured as mirrors, so the disk you choose, or the

  slice within the disk mustexceed the Suggested Minimum value.

  NOTE: ** denotes currentboot disk

  Disk Device                                            Available Space

 =========================================================================

-[X] ** c0t0d0                                      286090 MB

|[X]  c0t1d0                                    286090 MB (F4 to edit)

)|[-]  c1t500507680B232B3Ed0                                0 MB

 |[-]    c1t500507680B232B3Ed1                                0 MB

 |[-]    c1t500507680B232B3Ed2                                0 MB

 |[-]    c1t500507680B232B3Ed3                                0 MB

 |[-]    c1t500507680B232B3Ed4                                0 MB

 v[-]    c1t500507680B232B3Fd0                                0 MB

 

                                Maximum Root Size: 286090 MB

                                Suggested Minimum:  11151 MB


    F2_Continue    F3_Go Back    F4_Edit  F5_Exit    F6_Help

 

- Preserve Data? --------#如果不保留磁盘的数据,选择F2,如果保存磁盘的数据请选择F4

  Do you want to preserveexisting data? At least one of the disks you've

  selected for installingSolaris software has file systems or unnamed slices

  that you may want to save.

 


    F2_Continue    F3_Go Back    F4_Preserve    F5_Exit  F6_Help

 

Configure ZFS Settings ----------------------------#对ZFS磁盘进行设置

  Specify the name of the poolto be created from the disk(s) you have chosen.

  Also specify the name of thedataset to be created within the pool that is

  to be used as the rootdirectory for the filesystem.

 

 

              ZFS Pool Name:rpool                                 

      ZFS Root Dataset Name:s10s_u11wos_24a

      ZFS Pool Size (in MB): 286091

  Size of Swap Area (in MB):4096

  Size of Dump Area (in MB):2560

        (Pool size must bebetween 7055 MB and 286091 MB)

 

                        [X]Keep / and /var combined

                        [ ]Put /var on a separate dataset

 

#注意,这里和UFS设置不太一样,UFS可以对每个磁盘片进行设置(可以设置各类分区的挂载如/home,/swap,/opt等等)而ZFS并没有这样的选项,可在系统建立后在ZFS池中去创建与挂载

 


    F2_Continue    F3_Go Back    F5_Exit  F6_Help

- Mount Remote File Systems? --------------------------#挂载远程文件系统

  Do you want to mountsoftware from a remote file server? This may be

  necessary if you had toremove software because of disk space problems.

 

 


    F2_Continue    F3_Go Back    F4_Remote Mounts    F5_Exit  F6_Help

 

- Profile --------------------------#显示安装配置信息,想更改按F4,否则F2开始安装

  The information shown belowis your profile for installing Solaris software.

  It reflects the choicesyou've made on previous screens.

============================================================================

 

 -              Installation Option: Initial

 |                      Boot Device: c0t0d0

 |            Root File System Type: ZFS

 |                  Client Services: None

 |

 |                          Locales: Chinese,Singapore (UTF-8)

 |                                  SimplifiedChinese EUC

 |                                  SimplifiedChinese GB18030

 |                                  Simplified Chinese GBK

 |                                  SimplifiedChinese UTF-8

 |                                  TraditionalChinese (Hong Kong) BIG

 |                                  TraditionalChinese (Hong Kong) UTF

 |                                  Traditional ChineseBIG5

 v                                  TraditionalChinese EUC

 


    F2_Begin Installation    F4_Change  F5_Exit    F6_Help

Preparing system for Solaris install #开始系统安装

Configuring disk (c0t0d0)

        - Creating Solarisdisk label (VTOC)

Configuring disk (c0t1d0)

        - Creating Solarisdisk label (VTOC)

        - Creating pool rpool

        - Creating swap zvolfor pool rpool

        - Creating dump zvolfor pool rpool

。。。。。。。。。

金沙js333娱乐场 45

 

  Pausing for 30 seconds at the"Summary" screen. The wizard will continue to

  the next step unless you select"Pause". Enter 'p' to pause. Enter 'c' to

  continue. [c] c  按C继续

 

  Pausing for 90 seconds at the"Reboot" screen. The wizard will continue to

  the next step unless you select"Pause". Enter 'p' to pause. Enter 'c' to

  continue. [c] c  按C继续

 

Creatingboot_archive for /a

updating/a/platform/sun4u/boot_archive

syncingfile systems... done

rebooting...

Resetting...  #重启完成系统安装

Solaris 11(x86)安装后不能使用中文EUC的问题 http://www.linuxidc.com/Linux/2012-10/71786.htm

Solaris 10/11 (x86)下使用VNC - Xvnc http://www.linuxidc.com/Linux/2012-10/71787.htm

Oralce Solaris 11 源码安装Qt 4.8.3 http://www.linuxidc.com/Linux/2013-03/81440.htm

Solaris 11 安装 Zabbix Agent http://www.linuxidc.com/Linux/2013-07/87701.htm

Solaris中配置DNS服务器 http://www.linuxidc.com/Linux/2013-06/86724.htm

Solaris系统配置IPMP教程(基于IP寻址) http://www.linuxidc.com/Linux/2014-12/110156.htm

本文永久更新链接地址:http://www.linuxidc.com/Linux/2014-12/110834.htm

金沙js333娱乐场 46

{20} ok nvalias net /pci@1,700000/network@0,1(将当前link up的网口设定为net别名 )

Enter Selection, q to quit: q 

 3) DEC VT100

  5. Japanese

disabled      14:21:41svc:/network/nfs/server:default #关闭,需开启

……………………

# eeprom local-mac-address?=true

enabling tftp in /etc/inetd.conf

本文由js333发布于计算机互联网,转载请注明出处:操作系统,搭建高性能计算环境

关键词:

上一篇:异常处理,异常处理程序【金沙js333娱乐场】

下一篇:没有了